Vinyl gypsum (VOG) panels are panels with laminate like coating over top of the gypsum. What is gypsum? Gypsum is a soft and lightweight white or gray chalk-like material (similar to drywall). These vinyl-coated panels have a shiny finish, and there is often a printed design layer applied over the gypsum and under the shiny vinyl topcoat.
Typically 5/16” thick, these panels do not have tapered edges, so they are usually finished with a strip to cover the seams where panels meet.
When shopping and deciding if VOG panels are a good option for you, it's important to have all of the pros and cons.
•
Whether for the ceiling or walls, advantages include that they are lightweight, easy to install, and require low maintenance.
•
The vinyl coating on the VOG wall type is easier to clean than painted and textured walls. Crayons, markers, dirty fingerprints, and other common wall messes can be wiped off with regular household cleaning products rather than needing to be repainted.
•
The method of installation and vinyl material make this material type less susceptible to cracks caused by building settling, requiring even less maintenance.
While those reasons may entice someone to use VOG panels in their next renovation in their home or business, there are also some disadvantages that should be considered.
•
The first disadvantage to mention is that with the strips between each panel, there isn't a smooth, continuous look. This look disrupts the continuity of the walls or ceiling, especially when the pattern on the panel doesn't blend well. With the different edge profiles available through Kanopi, this wouldn't be a problem when going with the alternatives.
•
Another disadvantage of VOG panels is they are difficult to change the look. The color or pattern chosen when first installing, is the look that will need to continue, unless there is a complete replacement or renovation. VOG panels, due to their laminate coating, cannot easily be painted. If you like to change looks and styles, ceiling tiles are easily swapped and changed as often as you want.
•
The last disadvantage of vinyl gypsum panels is their low durability, With their inability to withstand any impact, the likelihood of a nick or bump is high whenever anything comes in contact with them. And when that happens, the panel would need to be replaced. Impact resistant ceiling tiles, on the other hand, can withstand contact, making them the ideal solution when this is a concern.Armstrong KITCHEN ZONE ceiling tiles are more affordable, lighter weight, and have more pieces per carton vs. vinyl-covered gypsum options. Tiles also meet USDA/FSIS guidelines.
The Armstrong CLEAN ROOM VL ceilings absorb sound and are washable, scrubbable, soil-resistant, and meet all USDA/FSIS and controlled environment guidelines.
Consider the alternatives that we have to offer at Kanopi. With a number of products that are always in stock and ready-to-ship directly to you, let us help you complete your next project.
Connect with our team of experts to find out what is right for your business or home.
June 7, 2023
Believe it or not, you don’t have to be stuck with the color or pattern of your vinyl over gypsum walls. Maybe you like it, maybe you didn’t have a choice at all. But painting is the perfect solution if you want to freshen up your walls and give your mobile home a whole new look!
With the right paint and tools, and the correct method, you will be on your way to your next DIY project. Are you ready? Here are some expert tips for painting vinyl walls in your mobile home.
Let’s get started!
Instead of standard drywall, manufactured homes typically use vinyl-on-gypsum (VOG) wall panels. These vinyl-coated walls have a shiny finish, and a printed design layer is often applied over the gypsum and beneath the shiny vinyl topcoat. Manufacturers typically utilize VOG panels because they are lightweight and simple to install in the factory. Instead of using tape to cover the seams like drywall, batten strips are used to cover the joints during assembly.
Although the way VOG panels are manufactured and installed makes painting more difficult, you can still paint the walls to refresh the look.
It is possible with determination and the proper method!
Before you begin painting your vinyl walls, you must first thoroughly clean the walls to remove any dirt or debris. To start, dust them with a soft cloth or brush. Then, using a mild soap and water solution, wash the walls. Before you begin painting, make sure all soap residue is removed and that the surfaces are completely dry and clean.
Keep in mind: Vinyl walls are not always a perfectly smooth surface. They may have ridges or other flaws that must be sanded down before painting. Sanding must be done gently, and not too aggressively, otherwise, you will damage the walls. While this step may seem pretty time-consuming, your walls will look more like those in a traditional site-built home. You can completely skip this step too, if you don’t mind keeping the original texture!
Once you have a clean slate to work on, apply your primer to the walls with a paintbrush or roller (as directed by the manufacturer). When the primer has dried, you can begin painting the walls with the desired color.
Crucial tip: Make sure you purchase the right type of paint when painting your vinyl walls. Otherwise, if you use regular paint on the vinyl surface, it will peel! The proper paint for the job should be easy to find at most hardware stores. Read the label carefully to ensure that it works with the vinyl on your wall.
Paint in as many even and thin layers as possible. This will ensure that there will be no dripping, bubbling, or peeling. While this slow-and-steady approach may take a little longer, it will be well worth it in the end! Don’t forget to let all of the paint completely dry before moving furniture back into its original location. You don’t want any accidents to ruin your hard work!
If your mobile home has vinyl walls, you may be wondering if you can paint them. As you can see, the short answer is yes! It isn’t as hard as it may seem if you take the appropriate steps in prep work to ensure your paint job adheres smoothly and beautifully.
So, go ahead. Throw on some work clothes and get out your painting tools. Your next DIY project is waiting for you!
Speak with an expert at Braustin Homes today!
If you are looking for more details, kindly visit aquarium bio ceramic rings, cooling tower noise reduction, cooling tower from china.