3/4 inch SS201 welded wire mesh is a grid made by welding 201-grade stainless steel wires at each crossing, with a nominal opening of 3/4 inch, or 19.05 mm. The opening size alone does not define the product: wire diameter, mesh dimensions, tolerances, finish, and packing also affect whether it suits your project. At Shunqiang Wire Mesh, we recommend confirming these details before requesting a quotation so that suppliers can quote against the same specification.
Please visit our website for more information on this topic.
This guide is for importers, distributors, fabricators, and project buyers sourcing 3/4 inch SS201 welded wire mesh. It is intended to help you define a purchase specification, compare supplier quotations, and identify questions to resolve before placing an order. It is not a substitute for engineering review where the mesh will carry loads, provide safety protection, or operate in a corrosive environment.
Welded wire mesh is formed from intersecting wires joined at their crossings, creating a regular grid. In a 3/4-inch specification, the stated opening is nominally 19.05 mm, converted from 0.75 inch. Buyers should clarify whether this refers to the clear space between wires or to spacing measured from wire center to wire center, because the two definitions produce different usable openings.
The opening is only one part of the construction. Wire diameter affects the amount of steel in the grid, its weight, and its suitability for a particular application, while panel or roll dimensions determine how the material can be handled and installed. A mesh specification should therefore identify these elements separately rather than relying on “3/4 inch” as a complete product description.
SS201 identifies the stainless steel grade requested for the wires, but a grade name should not be treated as proof of suitability for every environment. Service conditions such as moisture, cleaning chemicals, temperature, and exposure to salts can influence material selection. When corrosion resistance is important, provide the supplier with the actual operating conditions and have the grade suitability reviewed rather than assuming that all stainless steel performs equally.
Also distinguish material grade from finish and fabrication. Ask the supplier to state what material documentation, if any, can be provided for the order, and confirm whether the wires are welded and supplied in the requested form. If your project requires a particular standard, tolerance, or acceptance test, include it in the inquiry and obtain written confirmation before production.
| Specification | What to Confirm | Why It Matters |
|---|---|---|
| Opening | 3/4 inch (19.05 mm) nominal; clear opening or center-to-center spacing | Defines the grid and helps prevent misunderstandings about usable aperture. |
| Wire diameter | Required diameter in millimeters, plus any applicable tolerance | Influences mesh weight, handling, and suitability for the intended use. |
| Mesh dimensions | Panel or roll format, width, length, and quantity | Allows the supplier to assess production and packing requirements. |
| Material | SS201 grade requirement and requested documentation | Clarifies the material expected and how it will be verified. |
| Finish and edges | Requested surface condition and whether cut edges need treatment | Helps match the product to fabrication, handling, and appearance needs. |
| Commercial terms | Quantity, delivery destination, packing, and target schedule | Supports a more relevant quotation and delivery estimate. |
For clarity, use a complete written specification rather than a product name alone. For example, a buyer might request “3/4-inch nominal opening, 1.2 mm wire diameter, SS201, panels measuring 1,000 × 2,000 mm,” but those dimensions are an example of how to format an inquiry, not a standard configuration or a guarantee of availability. Confirm actual tolerances, dimensions, and production feasibility with your supplier.
A 3/4-inch grid may be considered for general screening, partitions, guards, fabricated panels, or other uses where that opening and the selected wire diameter meet the project requirements. The appropriate configuration depends on the size of objects that must pass through or be retained, the loads involved, the support spacing, and the exposure conditions. These uses are possibilities, not a claim that one mesh specification is suitable for every installation.
For safety-related or load-bearing applications, do not select mesh based only on appearance or opening size. Provide design loads, panel dimensions, mounting details, and the consequences of failure to a qualified technical reviewer. If the mesh is exposed to chemicals or outdoor conditions, share those conditions during material review and consider whether another grade or protection strategy is more appropriate.
Start by describing what the mesh needs to do: screen, separate, guard, reinforce a fabricated assembly, or serve another purpose. Identify what must pass through the openings and what must be retained. This functional definition helps determine whether a 3/4-inch opening is appropriate before you compare prices.
Shunqiang Wire Mesh contains other products and information you need, so please check it out.
State the opening measurement method, wire diameter, and required panel or roll dimensions. If the order allows substitutions, identify which dimensions can vary and which must be held to a stated tolerance. Where fit-up is critical, send a drawing or dimensioned specification and ask the supplier to confirm it in writing.
Confirm that SS201 is the intended grade and explain the service environment, including exposure to moisture, cleaning agents, or salts. Specify any finish, edge, or fabrication requirements that affect installation or appearance. Request relevant product or inspection documentation when your purchasing process requires it, and confirm exactly what the supplier can provide.
Compare offers using the same opening definition, wire diameter, dimensions, material, quantity, packing, and delivery terms. Ask each supplier to identify any exclusions or deviations rather than comparing headline prices alone. A quotation that does not define these details may not represent the same product as another offer.
The price of 3/4 inch SS201 welded wire mesh can depend on material input, wire diameter, panel or roll size, order quantity, processing, packing, and shipping destination. Minimum order quantity and production lead time are likewise supplier- and order-specific, so we do not recommend relying on a generic figure without a confirmed quotation. To obtain a useful estimate, provide the specification, quantity, delivery location, and required delivery date.
If your requirement is a trial quantity, ask whether the supplier can accommodate it and whether setup or packing conditions affect the offer. For repeat purchasing, define the approved specification and any inspection requirements before ordering so later shipments can be checked against the same basis. Confirm production timing and shipping arrangements in the purchase documentation.
A frequent mistake is ordering by aperture alone and leaving wire diameter or product format unspecified. Another is treating “stainless steel” as a universal corrosion-resistance guarantee without evaluating the operating environment. Buyers can also overlook whether the quoted opening is clear or center-to-center, leading to a mismatch between the delivered mesh and the intended design.
Reduce these risks by attaching a written specification to your inquiry and asking suppliers to list any assumptions. Review a sample or production details when appropriate for the project, but do not assume a sample replaces agreed tolerances or material documentation. Keep the confirmed quotation, drawing, and order specification aligned.
At Shunqiang Wire Mesh, we can review your requirement for 3/4 inch SS201 welded wire mesh and help clarify the information needed for a quotation. Send us the opening definition, wire diameter, panel or roll dimensions, quantity, application, destination, and requested schedule. If you have a drawing, material requirement, or inspection criteria, include it with your inquiry so we can assess the specification more accurately.
3/4 inch SS201 welded wire mesh is defined not only by its nominal 19.05 mm opening, but also by wire diameter, material, dimensions, tolerances, finish, and order terms. The next step is to document those requirements, confirm that SS201 suits the service environment, and compare quotations on an equivalent basis. Contact Shunqiang Wire Mesh with your specification and quantity to discuss a project-specific quotation and available supply options.
Contact us to discuss your requirements of 3/4 inch ss201 welded wire mesh. Our experienced sales team can help you identify the options that best suit your needs.