A replacement screen for a SWACO Mongoose PT or Pro shaker should be selected by verified fit and screening requirements—not by the machine name alone. Before ordering, confirm the exact shaker model and configuration, screen-panel dimensions, frame and edge design, support or tensioning arrangement, and required separation performance. PT and Pro designations identify equipment families, but they do not by themselves confirm that every corrugated screen is interchangeable. We recommend matching the screen to the machine’s documentation or a clearly identified sample, then checking the supplier’s technical details before installation.
For more information, please visit our website.
This guide is for drilling contractors, rig procurement teams, maintenance departments, and distributors sourcing replacement SWACO Mongoose PT/Pro corrugated shaker screens. It is useful when a screen is worn, damaged, being sourced from a new supplier, or being evaluated as an alternative to an existing product. The same checks also help buyers reduce avoidable delays caused by a panel that has the right brand description but the wrong physical interface.
We at Yuanpeng supply wire mesh screens and support buyers in checking replacement requirements. We cannot confirm compatibility from a product name alone, so we encourage buyers to share the shaker’s precise model information and screen details before placing an order.
A corrugated shaker screen is a screening panel whose mesh surface is formed with a raised or corrugated profile rather than remaining entirely flat. The profile can increase the usable screening area within a given panel footprint, depending on the screen construction and shaker arrangement. It is still the complete panel—mesh, backing or support structure, edge treatment, and fit—that must match the equipment.
Screen selection involves two separate questions: will the panel fit and be retained correctly, and will its screening characteristics suit the drilling-fluid and solids-control requirement? A screen that fits physically may not deliver the desired separation or flow behavior. Conversely, a suitable mesh specification cannot compensate for incompatible dimensions or a different tensioning interface.
Screen construction can vary by mesh material, wire arrangement, number of mesh layers, backing, and frame or edge design. The appropriate combination depends on the supplier’s available construction and the buyer’s operating requirements. Ask for a clear specification rather than relying on terms such as “fine,” “coarse,” or “high capacity,” which do not fully describe a screen.
Where applicable to the product and procurement requirement, request relevant API RP 13C information. Commonly used reported characteristics include D100, expressed in micrometres (µm), and conductance, expressed in kilodarcies per millimetre (kD/mm). These figures describe different aspects of screening performance; they are not substitutes for confirming the panel’s mechanical compatibility with the shaker.
Start with the complete equipment identification available from the rig records, nameplate, manual, or maintenance documentation. Record whether the machine is identified as Mongoose PT or Mongoose Pro, and note any configuration information that may distinguish the installed equipment. If several screen positions or panel formats are used, identify the specific position for the replacement.
Do not assume that screens described for one Mongoose family will fit another family simply because the product names are similar. Equipment revisions, panel styles, or installed arrangements may affect the interface. When documentation is incomplete, photographs of the shaker bed, retaining features, and existing screen can help a supplier assess what information is still needed.
Yuanpeng supply professional and honest service.
Measure a known compatible panel or use a drawing from the equipment supplier. A useful fit record includes at least three physical dimensions: panel length, panel width, and panel or edge thickness, each recorded in millimetres (mm). Also document the shape and position of edges, handles, seals, or other retaining features; dimensions alone may not describe how the screen is secured.
Compare the replacement’s support and tensioning arrangement with the installed system. Check whether the screen is designed for the same contact points and retention method, and whether it sits evenly without forcing or distortion. If the old screen is damaged or deformed, use it as a reference only with caution, because wear can change its apparent shape.
Define the required separation and operating objective with the solids-control or drilling team. Review the current screen specification, reported performance data where available, fluid characteristics, and the consequences of choosing a finer or coarser screen. Changing mesh or screen construction can affect both solids removal and fluid throughput, so a replacement should not be selected on mesh count alone.
Ask the supplier to state the proposed screen specification and clarify what each supplied performance value represents. If the buyer requires API RP 13C reporting, confirm that the information applies to the offered construction and is supported by the supplier’s documentation. Avoid treating an unverified equivalent or a visual similarity as proof of equivalent performance.
| Check | Information to Confirm | Why It Matters |
|---|---|---|
| Equipment | Exact Mongoose model and configuration | Helps establish the correct screen interface |
| Dimensions | Length, width, thickness, and edge details in mm | Reduces the risk of a physically incompatible panel |
| Retention | Support points, seals, and tensioning or locking method | Confirms that the panel can be secured as intended |
| Screening | Mesh construction and relevant performance data | Supports comparison against the process requirement |
| Supply | Quantity, packaging, documentation, and delivery terms | Helps procurement plan the order and its acceptance checks |
Replacement-screen pricing can depend on screen construction, dimensions, order quantity, packaging, and the documentation requested. A reliable quotation should identify the proposed model or reference, technical specification, quantity, price basis, and applicable shipping terms. Compare quotations on the same specification; a lower price is not a meaningful comparison if the screen design or supplied performance information differs.
Minimum order quantities and lead times should be confirmed directly with the supplier for the requested configuration. Stock availability, production scheduling, customization, and destination can affect the timeline, so buyers should not assume that a screen described as a replacement is immediately available. For urgent requirements, provide the target delivery date and ask the supplier to confirm feasibility in writing before committing to a schedule.
Before selecting a supplier, ask whether they can review the equipment identification, drawings, photographs, or a sample. Request a written quotation that specifies the offered construction and dimensions, and ask which performance information can be provided for that product. Clarify packaging, order quantity, production or dispatch timing, and how questions about fit will be handled.
At Yuanpeng, we can review the information you provide and discuss suitable wire mesh screen options for your replacement requirement. To support a useful assessment, send the shaker model and configuration, panel dimensions in mm, clear photographs of the screen and retention details, the existing screen specification if available, and your required quantity and destination. Compatibility should be confirmed against the actual machine and product details before installation.
The safest way to choose a SWACO Mongoose PT/Pro corrugated shaker screen is to verify the machine interface and screening specification together before ordering. Start by documenting the shaker identification, the three principal panel dimensions, and the retaining details, then have the supplier confirm the offered screen against that information. Contact Yuanpeng with your drawings, photos, or sample details to discuss a replacement option and obtain a configuration-specific quotation.
For more SWACO Mongoose PT/Pro Corrugated Shaker Screensinformation, please contact us. We will provide professional answers.