The cold catalyst, also known as the low-temperature catalyst, formaldehyde nemesis. It has a powerful ability to remove formaldehyde. Cold catalyst is another new type of air purifier air material after photocatalyst.
The pollutants in indoor air are mainly PM2.5 and other suspended particulates and harmful gases such as formaldehyde and benzene. At present, air purifiers commonly used are HEPA (High-Efficiency Particulate Arresters, that is, high-efficiency air filters) filtration, activated carbon filtration, electrostatic dust removal, and living oxygen technology, these technologies can effectively remove different pollutants
Most air purifiers use HEPA as the filtering material to achieve the purification effect, if the filtering material fails, not only can it not purify the indoor air, but will pollute the indoor environment. As the purification material tends to saturate, the adsorption capacity of the purifier will be greatly reduced, consumers should pay attention to observe the purification effect of the air purifier, if found that the purification effect is not obvious, we should replace the filtering material in time to ensure the purification effect.
HEPA purification technology: HEPA filter can be made of HEPA divided into PP filter paper, glass fiber, composite PPPET filter paper, melt-blown polyester non-woven, and melt-blown glass fiber five kinds of materials.
Room air purifier for dust can effectively filter suspended particles, for more than 0.3 microns of tiny particles, dust, bacteria, viruses, and other substances, there is a highly effective filtration, is safe and reliable dust filtering technology.
The principle of a cold catalyst home air purifier is catalytic oxidation, the catalytic component acts as a medium in the process, its composition will not change, and can be used for a long time without any treatment. The catalytic decomposition reaction does not require ultraviolet light, high temperature, or high pressure. Under the condition that the temperature reaches above 5℃ and the humidity reaches above 40%, the effect of catalytic decomposition of harmful gases by a cold catalyst can reach the ideal state.
What is a cold catalyst sterilization
air purifier
?
Cold catalyst, also known as the natural catalyst, is another new type of air purification material after photocatalyst deodorizing air purification material. Cold catalyst is a second-generation catalyst technology developed on the basis of photocatalyst, and it is also an updated substitute for photocatalyst.
According to the principle of adsorption-catalysis, the cold catalyst can decompose formaldehyde while adsorbing at room temperature, effectively decomposing formaldehyde and other toxic gases in the air into pollution-free carbon dioxide (CO2) and water (H2O), making indoor air greener health.
The biggest difference between it and photocatalyst is that it does not require strong light to react. In this way, the application range of cold catalysts is greatly expanded than that of the photocatalyst. At present, it is the most commonly used material for household removal of aldehydes, and it is also the best commonly used material for air sterilization purifiers.
Pure photocatalyst technology can only work under ultraviolet light, which is already 2000 years ago. The development direction of international photocatalyst technology in the 21st century is chemical coordination bond chelating functional element doping technology. Using this technology can greatly enhance the photocatalytic synergistic effect of photocatalyst materials] Several major features of cold catalyst air purifier:
The catalytic decomposition reaction of the cold catalyst does not require ultraviolet light, high temperature, and high pressure. In the normal living environment, it can play a catalytic effect to control pollution.
2. The cold catalyst purifier can decompose a variety of harmful gases:
The cold catalyst can simultaneously catalyze the reaction of various harmful gases such as formaldehyde, ammonia, benzene, TVOC, hydrogen sulfide, and oxygen in the air to produce water and carbon dioxide.
3. HEPA 7 stage air purifier with wifi and an additional filter. Long-term play a role:
In the catalytic reaction process, the cold catalyst air purification sterilizer product itself does not directly participate in the reaction. After the reaction, the cold catalyst does not change and is not lost. Therefore, once it is used, it has a validity period of more than five years without external damage. The formaldehyde release period is synchronized, and the long-term effect of treating formaldehyde, air dust, and air disinfection and sterilization is very good.
4. Air sterilization, safety, and environmental protection:
The main components of the cold catalyst are food and drug additives. The product is non-toxic, non-corrosive, and non-flammable; it can initiate a catalytic reaction under normal temperature conditions to remove harmful gases such as formaldehyde, benzene, xylene, toluene, TVOV, etc. The reaction product is water and carbon dioxide does not produce secondary pollution. It is a safe and environmentally friendly product that faces the future and is most suitable for home health and home furnishing. It can be called an air killer.
Catalytic reaction of air purifier cold catalyst
5. The sywipe
air purifier
has a wide range of uses:
The cold catalyst air purifier can be used to treat the free formaldehyde, ammonia, TVOC, hydrogen sulfide, and other harmful gases in man-made panels, furniture, wall wallpapers, chemical fiber carpets, curtains, bedspreads, and indoor air. Now the world is in the extraordinary period of covid-19. It is also a good choice to place a few in public places with the most traffic, such as schools, hotels, airlines, and railway stations. best air purifier for cigarette smoke 2021
The cold catalyst purifier is a low temperature and low adsorption catalyst. It decomposes and reacts to organic compounds in the air with oxygen through catalysis to generate other hydrated substances that are harmless to the human body, thereby eliminating harmful bacteria and prone to carcinogenesis at room temperature. Of organic compounds;
The photocatalyst absorbs organic compounds in the air when the purifier is inhaled through the catalyst. After the adsorption concentration is full, it is exposed to the sun for a certain period of time to turn it into water and carbon dioxide, and at the same time restore the adsorption function. Generally speaking, there is no big difference between the two, just the working process is different.
Compared with the cold catalyst filter, although the photocatalyst filter is also an effective way to solve the pollution of harmful gases, it is different from the cold catalyst.
The photocatalyst needs the adsorption material to adsorb and decompose the harmful gas. With the extension of the use time, the efficiency Will keep dropping. Therefore, after using it for a period of time, it needs to be exposed to strong sunlight to decompose and volatilize the harmful gas contained in the adsorption material.
If the exposure is insufficient or not timely, not only the photocatalyst can no longer decompose the harmful gas, but also because of the harmfulness in the adsorption material. The volatilization of the gas causes secondary pollution, and the suspended particulate matter adsorbed by it can even become a hotbed for bacteria-derived.
Sywip medical-grade air purifier has a high-efficiency photocatalytic purification core developed in cooperation with the French Standards Association Group, making your space free of odor, pollutants, and allergens.
With high quality products and considerate service, we will work together with you to enhance your business and improve the efficiency. Please don't hesitate to contact us to get more details of photocatalytic filter.